Low prices on the Sig Sauer P226 MK25 Night Sights 9mm start at Champion Firearms:

Service Auto Supreme. The Sig Sauer P226 is probably the best known for being used by specialist units including the SAS, not to mention many British Army units and the US Navy SEALs. It is a double-action semi-automatic pistol, originally chambered for the universal 9mm caliber. Mechanically speaking, there have been a number of significant improvements to the Sig Sauer P226 over the years.

Original contract models were supplied with phosphate or nickel-plated internal parts. The P226 started out utilizing a two-piece breech-block roll-pin system, but now incorporates a solid stainless steel pin. In 1996, once production shifted from Germany to the U.S.A., Sig Sauer started manufacturing the P226 with a slide machined from stainless steel bar stock.

These slides were much stronger, heavier duty and allowed the pistol to be chambered in the more powerful cartridges. In addition, the slide velocity and recoil were tamed by the increased mass of the CNC machined slide. This is a short-recoil operated pistol that has a traditional double action/single action (DA/SA) firing system.

The Sig Sauer MK25 is the exact pistol configuration carried by the U.S. Navy SEAL's and even bears the insignia anchor on its slide. It carries a stainless steel slide that sits atop a machined, 7075-T6 lightweight aluminum frame which is black hard-coated over anodizing. The slide also houses an improved, large external extractor positioned at the right rear of the ejection port. A passive firing pin safety lies hidden within the slide, and 10 diagonal rear-charging grooves enable positive loading and unloading.

A rounded accessory rail on the dust cover allows the user to quickly install lights and lasers. The frontstrap features fine horizontal grooving. The P226 MK25 features the original grip contour that Sig Sauer made famous, but with updated checkered grips that provide a firm grasp but also also allow for a quick draw from concealment. These molded grips fit the hand naturally and are comfortable when shooting.

To safely lower a raised hammer on the P226 MK25, shooters can easily employ a user friendly decocking lever located on the frame. Unlike many other DA/SA pistols, Sig Sauer positions the hammer decocking lever where it can be depressed with the right thumb, without having to change your grip on the pistol. The slide stop is located just above the decocking lever, and can be manipulated easily.

Several built-in safety features make it suitable for concealed carry. The hammer is blocked from contacting the firing pin if dropped. It has a rebounding hammer design, and is blocked from moving forward unless the trigger is held to the rear. Also, the firing pin block prevents the firing pin from moving forward unless the trigger is held to the rear.

The Sig Sauer P226 MK25 weighs in at 34.4 ounces and has a black Nitron finish that is extremely corrosion plus wear resistant. In case you are unfamiliar with nitron, it is one of the most durable finishes ever conceived. For starters, it is reportedly more salt spray corrosion resistant than any of its competitors. In terms of durability, it shows no delamination or cracking at maximum impact strength measurement tests. In addition, surface hardness, lubricity and chemical abrasion were found to be superior to other finishes. The pistol also features corrosion resistant internal parts.

With a 4.4" barrel and ships with three high capacity fifteen round magazines, the pistol has a double action trigger pull of around 10lbs., where single action subsequently resets to just 4.4lbs. A set of SIGLITE Tritium 3- dot night sights sit on top of the slide, are highly visible, easy to use and track well.

For service or repair, the pistol is backed by a manufacturers lifetime warranty. Overall, the Sig Sauer P226 MK25 is accurate, dependable, safe, simple to operate and is made here in the U.S.A.

Established in 1993, Champion Firearms is a retail gun store and indoor range located in College Station, Texas.

As a brick & mortar store, we pride ourselves on customer service, quality products and our competitive pricing.

Each listing is an item we actively plan to stock. While not all of our inventory is listed, the items contained on our website represent some of the most popular products we carry.

Our staff has worked hard and done their best to ensure the accuracy of every listing. In the event an error has been made, Champion Firearms asks your understanding while we make it right.

From all of us here at Champion Firearms, thanks for visiting our store. For assistance, please do not hesitate to let us know what we can do to help: (979) 693-9948 or [email protected]