Home > Handguns > Beretta >

Beretta PX4 Storm Sub- Compact 9mm
Beretta PX4 Storm Sub- Compact 9mm JXS9F21
PX4 Storm Sub- Compact 9mm (JXS9F21)
 
PX4 Storm Sub- Compact 9mm (JXS9F21)
Retail $695.00
Our Price: $540.00
You save $155.00!


Availability: Currently Out of Stock
Product Code: JXS9F21
 

Description Additional Information
 
Low prices on the Beretta PX4 Storm Sub-Compact Bruniton Finish in 9mm start at Champion Firearms-

A Rising Storm.
Beretta can trace its early history back to the year 1526 and has been owned by the same family for some 500- years. Scholars believe the company could be even older, but no one really knows for sure because the earliest surviving document only confirms a date off a sales receipt where Beretta had already been conducting business, not from a document specifying when the company was originally founded. It's hard to wrap your mind around the fact that Beretta was likely already up and rolling before Columbus set sail for the New World.

Unlike the Beretta PX4 Full Size and Compact series, the Sub-Compact uses the Browning tilt barrel systems. This was done to minimize the overall size of the pistol. Even so, the
slide is still beefy. In fact, it's a few tenths wider than your average competing double stack handgun. This has been mitigated somewhat by the fact Beretta rounded and made angular cuts both on top of the slide and to its flats. While thick, the pistol still works remarkably well. No sharp edges are present, though the lines are crisp for easy slide and fire control manipulation.

The Beretta PX4 Sub-Compact features a deeply recessed combat muzzle crown which protects the rifling and accuracy. A 3.0" barrel has been chrome lined to provide extreme corrosion resistance, as well as ease of cleaning. The barrel also features a slightly oversized muzzle to permit a tighter lockup and improve accuracy.

The PX4 Sub-Compact polymer frame is lightweight, yet durable and employs modern thermoplastic technology that uses reinforced fiberglass for maximum strength and integrity. Molded in steel slide rails greatly extend the life of the handgun. Scalloped molded memory grooves are located on either side of the frame to encourage safe placement of the trigger finger.

Interchangeable backstraps allow the shooter to better fit the pistol to their individual dimensions. Their are three included: small, medium and large. A mini integral Picatinny rail provides a solid attachment point for tactical accessories such as lights or lasers. The textured surface of the front and rear backstrap maintains a positive grip traction, even when wet or cold. It also gives a shooter improved control and handling.

Bruniton is Beretta's trade name to denote that it has a Mil-Spec finish. This is a proprietary Teflon over Parkerizing that provides superior lubricity, corrosion and wear resistance versus blued finishes. The Beretta PX4 Storm has a slide mounted safety, which also doubles as its decocking lever.

The traditional double action trigger is actually pleasant. Factory listed at 12lbs off the bottom, the initial double action pull feels much lighter. After the pistol resets to single action, the 4.5lb pull is crisp and consistent. An ambidextrous rotating safety lever also does double duty as a decocker. The steel magazine release is reversible and has positive engagement while holding the magazine firmly in place.

The Beretta PX4 Sub-Compact's large and powerful extractor is home to a highly functional loaded chamber indicator. When a round has been chambered, the extractor bulges out to reveal a red witness mark signifying the gun is gassed-up and ready to go. The pistol wears a set a visible 3- dot sights that get on target well.

To help prevent slide bite, the frame is equipped with an upswept beavertail that also helps provide greater control when firing. Front and rear vertical serrations provide a solid surface to charge the slide, or safely perform a press-check to confirm the pistol's ready status. Two thirteen round magazines, each in different configurations that serve a specific purpose. The first has a standard flush fit base plate for maximum concealment, while the second is a very clever finger groove base plate designated "snap-grip" that literally hinges downward to provide a more solid grip while in larger hands.

For repair, the pistol is backed by a "1+2" year policy-- which means that if you just complete and submit the service agreement card as requested, there will be a 3- year warranty. Overall, the Beretta PX4 Sub-Compact chambered in 9mm is a soft- recoiling, lightweight, extremely accurate, reliable and versatile self- defense handgun engineered to provide years of reliable service.
Features
Clever Hinged Magazine Floorplate- allows shooter to extend down for a more positive grip, or tuck for concealed carry
Bruniton Finish: Mil-Spec coating that is non- reflective, corrosion & wear resistant
Lightweight, Durable & Corrosion Resistant Frame
Integral Mini Tactical Rail
Ambidextrous Safety Lever + Decocker
Chrome Lined Barrel- provides excellent corrosion resistance
Recessed Muzzle Crown- protects rifling
Interchangeable Backstraps- helps accommodate different hand sizes & shapes
Caliber: 9mm
Magazine Capacity: (2) 13- Round
Barrel: 3"
Action Type: Traditional Double
Sights: 3- Dot Fixed
Weight: 26.1 ozs.
Slide: Steel
Frame: Durable Polymer
Warranty: "1+2" Year Policy (3- Year Warranty, Provided Card is Completed & Submitted within 30- Days of Purchase...Otherwise Only 1- Year Warranty)


Browse for more products in the same category as this item:

Handguns > Beretta
Handguns